From: Shenk, Jerry A (jshenk@decommunications.com)
Date: Fri Mar 31 2006 - 07:48:32 EST
Something else right along this train of thought - client configuration.
If the client is configured to connect to any AP, then you have no idea
where your laptops are connecting to. I have a client in a major
metropolitan area. Walking around in their office, there are about 40
wireless networks. One of the people from another office recently
commented how handy it was that they installed wireless.....ah, they
hadn't. That means she was connecting to an AP in some other office.
-----Original Message-----
From: steven@lovebug.org [mailto:steven@lovebug.org]
Sent: Thursday, March 30, 2006 10:24 PM
To: Matthew Webster
Cc: pen-test@securityfocus.com
Subject: Re: Wireless Audit Reports
Hello,
I have been reading all of these replies and would just like to throw in
a
little bit more. Someone mentioned that a person could setup another AP
to
lure in people from your network. This is definitely a potential risk
as
they can do this in a few ways. They could just stand up their AP with
their own SSID and hope for someone else to connect and attempt to
compromise their machine, sniff traffic, and/or conduct MITM attacks.
They could also do the same thing by cloning the name of your network's
SSID. I am not sure how many APs your environment has, but it might be
worth documenting all of the instances of the valid SSID and the
associated MAC addresses. If you are going by SSID alone it is possible
that there is a fake AP they showed up and it could be overlooked.
Documenting the MAC addresses, channel, location, IP address, etc of
your
APs and looking for any anomalies might be good too. If you are going
to
be doing consistent reports you can always refer to your previously
collected information.
Also, as I am sure you have know and has been referenced in another post
-- your report is only as accurate as the time period for which your
audit
was conducted. Ad-hoc networks, rogue APs can be plugged in an
unplugged
at any moment. Unless you have something like AirDefense or a WLSE --
you
need to frequently check to be sure you are consistently free of these
things. Ad-hoc (peer-to-peer) networks are frequently overlooked and
area
decent risk, especially if your machines aren't fully patched. If you
want to have a full and comprehensive report, make sure you are looking
at
802.11a/b/g.
Anyway -- I hope that helps. Btw.. what "tools" are you using now?
Steven
> Hi,
>
> I work in an environment that has a policy that does not permit
> wireless devices. We still do an "audit" of the area to ensure that
> there are no wireless devices in our area. I wish to prove that there
> are no devices. Being in a city, there are literally hundreds of
> wireless networks present - perhaps up to 50 in any one given area of
> our building. I have tracked the signals down and have determined
that
> there are no rogue access points or peer networks hidden in our
portion
> of the building.
>
> Now a traditional wireless audit would be easy. I could report
> the signal strengths of our devices, if the SSID's are correct, are
> non-broadcast, etc. That would be an easy report to create after data
> collection. In this case, I am trying to prove a negative. I can
list
> networks, signal strengths, etc. but I feel like I am fluffing the
> report with meaningless and time wasting statistics. Does anyone have
> any experience in what they would report under these circumstances?
>
> Matt
>
>
------------------------------------------------------------------------
------
> This List Sponsored by: Cenzic
>
> Concerned about Web Application Security?
> As attacks through web applications continue to rise, you need to
> proactively
> protect your applications from hackers. Cenzic has the most
comprehensive
> solutions to meet your application security penetration testing and
> vulnerability management needs. You have an option to go with a
managed
> service (Cenzic ClickToSecure) or an enterprise software (Cenzic
> Hailstorm).
> Download FREE whitepaper on how a managed service can help you:
> http://www.cenzic.com/forms/ec.php?pubid=10025
> And, now for a limited time we can do a FREE audit for you to confirm
your
> results from other product. Contact us at request@cenzic.com
>
------------------------------------------------------------------------
------
>
>
------------------------------------------------------------------------
------
This List Sponsored by: Cenzic
Concerned about Web Application Security?
As attacks through web applications continue to rise, you need to
proactively
protect your applications from hackers. Cenzic has the most
comprehensive
solutions to meet your application security penetration testing and
vulnerability management needs. You have an option to go with a managed
service (Cenzic ClickToSecure) or an enterprise software (Cenzic
Hailstorm).
Download FREE whitepaper on how a managed service can help you:
http://www.cenzic.com/forms/ec.php?pubid=10025
And, now for a limited time we can do a FREE audit for you to confirm
your
results from other product. Contact us at request@cenzic.com
------------------------------------------------------------------------
------
**DISCLAIMER
This e-mail message and any files transmitted with it are intended for the use of the individual or entity to which they are addressed and may contain information that is privileged, proprietary and confidential. If you are not the intended recipient, you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received this communication in error, please notify the sender and delete this e-mail message. The contents do not represent the opinion of D&E except to the extent that it relates to their official business.
------------------------------------------------------------------------------
This List Sponsored by: Cenzic
Concerned about Web Application Security?
As attacks through web applications continue to rise, you need to proactively
protect your applications from hackers. Cenzic has the most comprehensive
solutions to meet your application security penetration testing and
vulnerability management needs. You have an option to go with a managed
service (Cenzic ClickToSecure) or an enterprise software (Cenzic Hailstorm).
Download FREE whitepaper on how a managed service can help you:
http://www.cenzic.com/forms/ec.php?pubid=10025
And, now for a limited time we can do a FREE audit for you to confirm your
results from other product. Contact us at request@cenzic.com
------------------------------------------------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:55:47 EDT